Guide: How to Clean a Paint Sprayer After Painting


Wagner 0417005After use it is super important to thoroughly clean your paint sprayer to ensure its longevity and that you can use it again without remnants of the last paint you used interfering. Are you looking for tips that will assist you in cleaning your paint sprayer? Then, there is no need to look further. In this short article, we are going to tell you how and what to do. At the end of the day, your sprayer should be running clean and ready to live another day.

Before getting started it is super important to note that individual sprayers have their own specific parts and methods of both use and cleaning. DON’T ignore these. Make sure you check your instructions for any specifics about how exactly you are meant to clean your sprayer as some models will have really useful info. The tips below will help you, but each model will have its own prerequisites.

Using a paint sprayer can be an eye-opening experience especially if you haven’t used one before. One of the advantages of a paint sprayer is that it can help to finish your painting projects as fast as possible, and with a lot more ease than some of the old fashioned methods, plus sprayers have become cheaper and more readily available.

Painting your house and/ or car with a sprayer is far better than merely brushing and rolling. However, when you are done, the only real con is that you will need to clean the paint sprayer completely and absolutely inside and out.

Tips for Cleaning Your Sprayer

You’re probably going to need to disassemble the sprayer into its individual pieces, which shouldn’t be too difficult, as many of them are delivered in individual pieces and its components are designed to be replaced (such as the nozzle) if needed.

When you are done with painting, the first thing you should do is to place the intake hose in a bucket of water, and wash it properly if it is latex-based paints. Also, use lacquer thinner if you just finished using oil-based paints.

Keep washing it until the paint sprayer becomes clean and clear, if there are any remnants of paint then unfortunately you’re going to have to go again.

While cleaning the paint sprayer, try to use a pair of protective gloves, this will avoid making a mess of yourself instead of the sprayer.

Flushing out the nozzle can be the most important aspect, and don’t underestimate how much water this might need.

Make sure you filter lacquer thinner with a pair of cloth rag, after which you can place the used thinner to its original container for future use.

There are different ways of cleaning it. Disassemble the gun, and ensure you fill the bucket or reservoir with few cups of paint thinner. Every part of the sprayer should soak very well inside the bucket to ensure that all of the paint washes away with relatively easy.

Use a paint brush and start scrubbing off the parts that were soaked in the bucket and still have signs of paint – this is a simple process, and it will go miles in removing all kinds of residue left over.

Finally, the used paint thinner can be filtered and put into its original container- all you need to do is to strain the substance with a clean rag. Keep in mind that the paint sprayer may not be properly cleaned if you did not filter the paint thinner. It is very easy to do so.


Paint sprayers can be cleaned effectively and efficiently if you use the right tools.

Cleaning your paint sprayer is not as difficult as some think, but it requires some element of care. Going through the process will serve you well in the future of using a sprayer, and if you’re a professional decorator it is even more important to ensure that your next project isn’t hindered by the residues of your last, and that your sprayer, nozzle and all, lasts for a long time.

If you buy any paint sprayer, make sure you read the manual very well; reading it will help you to make optimal use of it and this includes any specific tips to

Feel free to share your own tips below and ways you’ve managed to clean your sprayer effectively.

Wagner 0518080 Control Spray Max HVLP Sprayer review


wagner 0518080The Wagner High Volume Low Pressure Sprayer, known more commonly as the Control Max is available in amazon as well as other DIY stores and decorating suppliers both online and offline.  It has many great features, and comes with a couple of different cup options and a sprayer with options on it to give you the most control possible. This product has a ‘turbine’ type air supply and hose which is, incredibly, nearly twenty foot long, and it hooks to the gun. Basically if you are looking for something to shoot out Latex paint, then this is the one may well be an option you because the Wagner 0518080 Control Spray Max HVLP Sprayer has already garnered a huge amount of reviews showing just what a good option it is for big projects and spraying large areas.

How to Use It

You can find the on and off switch situated on the top of the turbine handle. When you want to control the pressure of the air that is released by the turbine, you can adjust it very easily with the help of a simple but intuitive dial. It is a good idea to lower the setting for materials with low viscosity and raise the pressure levels for high viscosity materials that are thicker. If you find that the spray level is excessive, then it can be lowered using the air pressure settings.

The air cap has ear like provisions which can be rotated to customize or adjust the pattern of spraying based on how you want it to be. In fact there are lots of types of air cap settings including a round pattern, a useful horizontal pattern and vertical pattern that can suit different types of project.  However caution should be exercised not to trigger the gun accidentally when you are attempting to get the air cap adjustments perfect for your session.  The trigger on the spray gun has a regulator which is used to adjust the volume of the material to be sprayed. If you are a newbie, it is a good idea to try using this spray on a piece of scrap wood or board prior to using it for the actual work because using the HVLP control spray may require just a little bit of practice, and you don’t want any errors to be on the finished product.

The target object on which the material has to be sprayed must be thoroughly cleaned before you actually start spraying to ensure seamless spraying and smooth, impressive results. The parts of the target area or object where spray is not required should be covered or wrapped up using a mask. In addition to having the target object clean, the area where you plan to spray should also be totally dust free so that you can reduce the chances of blowing unwanted dirt and dust onto the sprayed area and giving it a cheap, unprofessional finish. A vacuum or air compressor can get rid of these kind of little disruptive things.

It is very easy to clean by using a suitable cleaning solution. Latex materials can be cleaned using soapy warm water. Oil based materials must be cleaned using mineral spirts. Appropriate precaution must be taken not to clean the nozzle in the gun with sharp objects that can hurt the air hole. Also silicone based solvents must not be used to make sure the product stays in good condition. It should be operated with the air filters to prevent dust from getting into the main unit.


This is a very good sprayer to paint walls, shelves, wooden cabinets etc. And has a huge amount of options for the user, making it good for both professionals, and even those of us just indulging in some DIY at home. As well as being very easy to handle and once you know the knack of operating it, you will get the results you’re wishing for without too many issues.

What is the Best Paint Sprayer for Spraying Chalk Paint


homeright c800766Chalk paint is a fantastic finish for furniture and other items, and widens the horizons of what we can do in our home with DIY or craft projects. It is thick, and it can be tough to get the flow of paint right if you’re using a sprayer, so we’ve compiled some information and short reviews to help you choose a sprayer for chalk paint. One of the most effective paint sprayers for projects using the chalk variety, would be the brilliant HomeRight Finish Max Pro Paint Sprayer.  It comes with long hose and this sprayer is very handy to use and makes your work seemingly effortless. You can use this sprayer to paint all sorts of craft projects using both other varieties, and of course, chalk paint.

One of the possible questions before starting the work would be “How do you choose which spray pattern should be used?” The simplest way is to test the flow and pattern out on a piece of cardboard. If you want to spray horizontally the nozzle should be positioned horizontally and if you want to spray vertically then the nozzle must be positioned vertically (common sense, I know). When you are using this sprayer, you just have to make sure you just don’t just keep it in one place as it may start dripping, so keep it moving. Most of the time you’ll be wise to thin chalk paint with water and you have to ensure that it is in the correct consistency. If you put too watery of a paint it may drip and if you put too thick of a paint it will get clogged. You have to get probably around 30 seconds for the viscosity. The instruction manuals can also help you understand how exactly you need to thin the paint but it isn’t rocket science at all. After you have thinned, you have to pour it into the spray drum and attach the spray gun to it. One of the reasons why HomeRight Finish Max Pro Paint Sprayer, also known as the C800766, is very effective for using chalk paint is that the spray gun, nozzle are very nicely designed to deliver good results.

HomeRight Finish Max Pro Fine Finish Sprayer provides two separate spraying patterns for close control and precise spraying. The product life is extended and performance is enhanced through special features such as Brass Needle and Housing. Chalk paint flow can be regulated on the spray gun by altering the controls and you have a manual to help talk you through how to make these changes on your model.

Once you are done with the job, it is time to ensure the cleanup is completed with minimal fuss. Although it comes out very easily, remove the hose with care because there may well be remnants of your paint in the hose. Just drop the hose in a warm soapy solution of water. The other part of the system can really easily just be wiped clean with a rag. The container, nozzle and cap can also be washed in warm soapy water.

We wanted to provide you with an alternative to look at too, and though a little more expensive, the Graco Truecoat sprayer Pro II is another exceptional sprayer for projects that need chalk paint. It helps to get professional results easier and faster. It boasts an amazing thirty times the pressure of other sprayers, Truecoat sprayers normally don’t need thinning of materials and will give you a smooth even finish in just one coat. When it comes to speed, Graco Truecoat is so much faster than brushing or rolling. The spray settings can be adjusted specifically for projects that use chalk paint which makes it a perfect choice for us here.  The easily replaceable parts using simple components makes it a desirable sprayer that can last for an extended period of time. It works very well even for very thick “Chalk Paint” that is used to refinish furniture with as close to zero overspray as you’re likely to get. The Truecoat pro is designed for ease of use, and can be a wonderful choice for those of us who do a lot of spraying.

Neiko® 31215A Air Spray Gun Review and Features


neikoThe impressive and pro looking Neiko 31215A Air Spray Gun will truly prove itself to be a value addition for professionals and home DIY lovers alike, as it can easily plough its way through a wide range of projects with professional results. It can work well for users who need to spray paint on furniture, wooden panels or structures or metal. This sprayer works best with medium weight paints. If you prefer a spray gun that includes a pump then this may not be the right one for you because it needs to be attached to an air compressor to do its business, but that isn’t a problem for most of us, and air compressors are relatively simple to get your hands on. Experienced users can take advantage of the features that enables them to randomly adjust spray patterns, nevertheless beginners may not be able to make use of this feature without adequate experience. Though it can help you work on variety of painting projects, it still has limitations while working on ceilings.

The gunmetal nickel coating on the spray gun makes it even more durable and resilient. It also comes with a 1.7 mm nozzle, a cup and a very handy pressure gauge. The aluminium cups are chemical resistant and the quantity of material that a cup can contain amounts to 20 ounces approximately. It has a valve using which the air pressure can be regulated. It is an ergonomically designed sprayer system which means it won’t hurt your hands even after prolonged use, and makes spraying enjoyable and uncomplicated. Users get precise control and extra comfort through the pistol grip. 40 PSI is the operating pressure and 10 PSI is normally the pressure when it is at work.  The nozzle is corrosion resistant because it is made using high quality stainless steel. The work surface is safeguarded from dust through the internal filter which collects any unwanted particles or anything which may have got into the paint.

Check the current price and more consumer reviews

To be able to use Neiko 31215A Air Spray Gun efficiently, it is really useful to have some experience in using High Volume Low Pressure (HVLP) spray guns. But it can’t be classed as very difficult to use this system when you do not have significant experience in using HVLP spray guns. Though you can get this product for a cheap price, it may not be the best option for users without any experience. So if you are newbie it is safe to opt for more beginner targeted guns rather than these spray guns. It works great to accomplish finishing projects such as kitchen cabinets, furniture etc. but these aren’t the only uses. Since the system produces consistent pressure through the pressure gauge feature, it helps to result in even coating throughout the spray. This system is super straightforward to clean, though the manufacturer has not provided instructions on clean up, it’s easy to do with a little common sense and DIY lovers will know what they’re doing.

The spray patterns of the 31215A are generally nice as the gun has a really easy to use knob to control spray patterns based on your own preferences. It works great but sometimes the spray is slightly narrow. Though the features offered are not the same as some of the other amazing models we’re seeing pop up, and it has some discrepancies, it is not a bad choice, especially when you look at the price compared to many expensive spray guns in the market. It is a good option for the price, especially for experienced users, and is recommended by us here at paint sprayers guide.

How to use a Paint Sprayer? Our Guide and Top Tips


homeright c800766Paint sprayers are the perfect tool to cover large areas pretty quickly and can even be a lot of fun to use as well. Using spray paint can be super easy but it has been known to be little tricky too, especially if you’re just a DIY enthusiast rather than a professional decorator. This article is here to provide you with some tips that will come handy when you use a sprayer to deliver the utmost in excellent results.

In addition to having all of the basic items for getting started such as drop sheet, a bucket of water etc. it is good practice to wear your safety gear, this includes googles and a face mask while spraying. Make sure you always the read the instructions and safety manual before starting work as there are different specifications for each model of sprayer and some will require different precautions. Before you start spraying, you need to thin the paint down by around 15%. Detachthe container and stir the paint in the container along with a little water as a thinner, slowly adding it, if it is water based paint or you can even thin it with turpentine, if it is oil paint, until you arrive at the consistency that is required.

You can now attach the container for the paint to the sprayer and all you’ve got to do is pull the trigger to start using it. Before you start actually painting your surface, you can run a quick test on another area such as scraps of cardboard or throwaway wood and make the nozzle adjustments based on the consistency you would like to have. If you do not have lot of experience, it is best to start on a large flat area like the side of a wall that is not easily seen. In fact you can even spray water for practice but make sure you let the surface dry completely before you start painting with real paint.

When you start your real work, you have to use a really steady motion both vertically and horizontally. In a good spray pattern the paint is thorough evenly distributed onto the surface. There are several techniques you can use to ensure an amazing finish.  Start at minimum spray pressure and slowly increase the pressure until a good spray pattern is achieved. If the finish is uneven, then your pressure setting should be altered accordingly.

Spraying at the lowest pressure possible while getting used to it and finding the right spray pattern will save wear and tear on your pump and spray tip. If you are using the maximum pressure setting and the spray pattern is still not suitable then a smaller spray tip size should be used or the material should be thinned.

Any spray gun must be placed or positioned approximately twelve inches from the surface and you should aim straight at the surface. Keep the gun at a consistent distance from the surface. Hold the gun straight with no tilt up or down or angle left or right.

You should also work in sections as far as you can comfortably reach. When spraying overlap the prior stroke by half. Trigger the spray at the beginning of each stroke and release before ending the stroke. Remember to clean up thoroughly when you are done.

Once you master the basics and follow the usage instructions meticulously, you can achieve superb results using paint sprayers with none of the work of having to use a brush.

Wagner 0417005 Control Spray HVLP Sprayer Review


Wagner 0417005Wagner HVLP control spray is a superb model of paint sprayer for stains, sealers, paints, varnishes and other thinned materials being applied onto small to medium exterior projects, whether you’re a professional decorator or craftsman or just a DIY enthusiast. It is super simple to use making it an excellent choice for those new to the process and you can even have a bit of fun with it. It can help you get the job done in a fraction of the amount of time it would take by hand that will also give you a sense of pride in your project. It comes with an integrated turbine filter that is replaceable and provides clean air to ensure no imperfections and a neat finish. This product’s variable flow trigger can be enabled using a thumb knob that easily adjusts the flow of whatever substance you’ve chosen to spray, and provides the most accurate control.

This product measures 6.5 x 9.8 x 10.8 inches. The paint cup is large enough to hold enough to handle complete projects with just a single fill. There is also a three position air cap which quickly and simply adjusts from a horizontal to a vertical, to a round spray pattern by simply twisting the air cap. The turbine is self-contained and maintenance free. It is made in such a way to last, and offer persistent performance.

Check the current price and more consumer reviews

The Wagner 0417005 Control Spray HVLP Sprayer boasts of a unique and intelligent Lock and Go technology that helps to swap out the spray cartridge, to change materials or clean the sprayer with the quick release system. This feature is designed to provide extremely quick color changes and totally hassle-free clean-up makes it highly desirable.

Using the High Volume Low Pressure technology (HVLP), the intake air enters the turbine at the back of the sprayer and then flows to the paint cup and air cap. This helps in pressurizing the paint cup and atomizing the material, forcing the material up the tube and to flow out of the air cap. This process gives you maximum control and results in very little overspray which results in minimal wastage. This HVLP control sprayer works great when used for spraying thin materials such as wood sealers and deck stain. It enables three pattern shapes with varying flow controls.  Covering specific areas as required can be achieved using the variable flow feature at the trigger. The level of control this system offers you is one advantage, however it is designed in such a way that the handle provides good grip and easy to hold feeling even when you have to spray for long hours. It just makes the job easy and painless. It works so much better than aerosol sprayers when you want more control, especially when you want to spray thin materials like enamels as well as stains that are transparent, in these circumstances the utmost in control is needed the most for effective results. The manufacturer offers a one year warranty for this product which is quite assuring. In addition to using to spray deck railing, you can use it for spraying craft projects and furniture and play sets that are usually used in the yard.

I ordered this product online and it has worked very well for me till now. To put it in simple words, the Wagner control spray can give you the professional spray that you can see in quality factory paint finish. It is hard to find fault with this product whether you’re a beginner or seasoned pro at spraying. At the time of writing the majority of reviews have given this product five stars, which shows how well received this has been by consumers. The Wagner is very unlikely to leave you disappointed or wanting more from your paint spraying.

HomeRight C800766 Finish Max Fine Finish Sprayer Review


homeright c800766It seems only right that in the modern age we don’t rely on outdated methods to paint our homes, furniture and anything else which needs it. The best technology has brought us so far is a sprayer, and they do a very effective job. The HomeRight C800766 is one of the best out there, and we have a full review for you today to check out whether this might be the one for you.

This sprayer goes way beyond normal, traditional brush painting and is designed to have the ability to get right into the corners and awkward spots like none of its competitors can manage. It is in this regard arguably more efficient and effective than any other sprayer in the market, and can even save you on paint by working more evenly – it may only require three or four gallons instead of five to do just as good a job.

This product also features a measuring cup that measures thickness of the paint it is using. In my experience it is best practice to have a small brush ready to hand because when you are new to using it in case you over or under-spray, you can still do touch ups and balance it out with a brush. Based on the directions given in the instructions, you have to kickstart spraying, then spray it across and then stop. You have to hold it at more or less the right distance in order to ensure that you don’t spray outside of the desired area, this takes a little practice but won’t be too difficult to master. If you want to have a horizontal pattern, you have the option to do that with this product. Similarly you also have options for vertical and it can even do 45 degrees with ease. When you have to spray on the side supports or unusual surfaces it may well need you to use a 45 degree angle and you can quickly do it with this sprayer, something not all of them offer. Another tick in the box of the HomeRight C800766.

This comes with a brass tip and as we’ve mentioned, the different spray patterns. It is well suited for thin materials. I tried using this on couple of decks and it reduced the time really significantly while other sprayers would have taken much longer time. It is user friendly and even first timers quickly get to grips with it.

This is a professional product, which gives an edge to your painting that you won’t get without hiring in. It’s amazing whether you’re a decorating professional or just a DIY enthusiast.

Since the type of spray you get dictates the sprayer as to the position of the nozzle, it is very important to adjust as such that you get the spray as you are looking for and not one of the others. The manufacturer of this product recommends that at first you experiment with the nozzle positions to try and find out which out of these works best for you. The tube that draws the paint into the sprayer, can have two different positions. It can go to the backward position which is amazing for spraying upwards such as the ceiling or if you’re holding above head height as it can easily grab the paint that way. The tube can be set in a forward position if you are going to be spraying upright as well as downwards. There is also a tiny knob with max and mid options that helps you to set the pressure depending on what you need.

The cleaning afterwards is also pretty easy. You can easily pour any excess back into the container, fill the rest of it with cleaning materials, screw it on and spray the liquid into a bowl or old bucket for a matter of seconds which clears out the mechanism after which you can open it up and you will find it as good as new.

I think it is a solid buy especially for first time users – it is very easy to set up and it’s not complicated to use. Overall a great sprayer with impressive features, it is good value for money and it can even save you cash in the long run by reducing your paint costs.